Polyurethane Release Agent

Home > Polyurethane Release Agent

Mould Release Agent for Polyurethane(PU) Synthetic Wood

Item No.: MK-FW303
This product is a release agent for PU hard bubble and Semi-rigid PU,mainly used for the PU imitating wood furniture,PU flowerpot,PU photo frame,PU marble pillar and so on.
INQUIRY Buy At Alibaba
Description


Mould Release Agent for Polyurethane(PU) Synthetic Wood MK-FW303

Summary

SAKURAI release agent for PU rigid foam is for semi and rigid PU, mainly used for PU imitating wood
furniture,PU flowerpot,PU photo frame,PU marble pillar and so on.Good at demoulding and convenience
to clean product, easy  to  paint and varnish.Topical  type  is  suitable for Polyurethane molding,majorly
use in the hard buller and Semi-rigid production line.The mold temperature is in 30℃~80℃.

Index

Ingredient

Hydrocarbon,separation reagent and

polymer composite spray release agent

Appearance Milky White Liquid
Density 0.82 g/ml
Flashing Point >120°C

Application

This product is suitable for non air or has air assisted spray equipment,also can be used for hairbrush or  contton cloth to scrub.It is better to shake up before the production-manufacturing.


Usage Process
1. Use  the  corresponding  mould cleaning agent or other suitable solvent toclean the mould, to clean the 
residual release agent or other pollutant, and use  the  clean  contton  cloth,  use  the benzoline  or the chlorinated solvent to wipe and keep in the dry air.
2.During the normal operating temperature,painting on the mould 4-5 times each paint need to ensure
that has a whole thin film on the mould.
3.Start the mold manufacturing.
4.After each perfusion demoulding,need to paint a whole thin film on mould, to make sure next time can
be easy to demoulding.

Storage and Indate

Keep  the  container  leak-tight ,  to prevent  the solvent  volatilize, storage in 20°C-38°C, to  make  sure maximum impact,avoid freeze.correct use method ,this  product  has  a  lower  degree  dangerousness.
Expirtation date is about 12months at least.

1. Are you a manufacturer or a trader?
We are one of largest manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use up all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process. You should adjust a suitable dilution ratio according to the specific practical testing.

TOP