Mould Release Agent for Aluminum Die Casting

Metal Casting Release Agent

Home > Metal Casting Release Agent

Mould Release Agent for Aluminum Die Casting

Item No.: MK-TD
Sakurai  MK -TD series is environment-friendly  aluminum  alloy Release agent. It is applicable to motorcycle parts, simple aluminum alloy castings, small size appliance castings ect., do not contain HAP and PAHS, Match  the  latest ROHS and REACH enviro

Mould Release Agent for Aluminum Die Casting  MK-TD

Sakurai Release agent MK - TD is environment-friendly product for aluminum alloy. It is applicable to motorcycle parts, simple aluminum alloy Castings, small size appliance castings ect., do not contain HAP and PAHS, Match  the  latest ROHS and REACH environmental protection Standard, Conforms to the ISO9001 enterprise production quality index, Cost-Effective, uses widely!

1. Excellent demoulding performance

When Sakurai release agent is sprayed to the mould surface, its effective Ingredients form dense film at once. The membrane in the injection Process is high pressure resistant, scouring resistant, low friction Coefficient, effectively prevents die-casting products to soldering with the Mould. It can help the die-casting product not adhering to mould and Prevent product variant. At the same time the excellent lubrication Performance speeds up the flowing aluminum liquid, so that the aluminum Liquid can rapidly form a mould. Avoid the product defects and pull.

2. Excellent surface brightness

Sakurai products adopt rare and special materials. It can effectively solve The problems such as casting surface turns black, too much water lines And cold shut. Can solve the problems happening in postprocessing, such As: polishing and electroplating.

3. Fully protect mould

Sakurai release agent forms a protective film on the mould surface. Effectively reduce the heat for the mould and reduce the impact from the Liquid aluminum to the machine. Correct selection of high quality mould Release agent can effectively protect the mould , prolong the life of the Mould and reduce the repair.

4. No carbon deposition

Sakurai release agent is very easy to use. No carbon deposition, no in-Cavity buildup, no mould scale and no oxide skin. Reduce the times to Clean the mould, and the product surface is bright and clean, does not Affect the subsequent spray plating, polishing and surface treatment.

5. Excellent high temperature resistant performance

Sakurai release agent has good thermal stability and chemical stability. In The using range of temperature it do not oxidize, not burn, not corrode Mould and not resolve residues on the mould surface. Even at high Temperature 300 ℃, weight lost few (thermal weight loss not more than 10%). Thus assure, at the high temperature, a strong demoulding film is Formed on the mould. Restraining high temperature sintering, reach the Role of lubrication and demoulding.

6. Good cooling effect

In die casting process because of the high temperature, mould has been Heating, the temperature of liquid metal rises, and the high mould Temperature makes die casting defect. Sakurai release agent effectively Controls these problems. Such as: soldering, blistering, cracking, and Burned. Being working in High temperature for a long time , the mould Material strength decreased, causing the mould crack and shorten the Service life.

7. High safety performance

Sakurai release agent non-toxic, non-flammable, no corrosion, no chemical Reaction. In the process of use it does not contain harmful smoke. The Mould and product surface has no residue, is easy to clean and Maintenance and does not affect the subsequent processing.

⊙Physical and chemical data

The smell Little smell Density(H2O) 1.10 PH
The appearance Milky liquid Using temperature 200℃-300℃
Flash point(COC) Not apply Refraction coefficient
Freezing point -10℃ Ph(5%diluent) 7

⊙Deployment Description 
1. Please finally determine the best dilution ratio according to test concentration deployed by users.
2. If your usage will be excess the typical usage please contact us for technical support.
3. Mix with water before use (diluted concentrate liquid with the water ).
4. Use ionized water to dilute, can improve the liquid service life and decrease dosage, reflect the process liquid excellent performance.

5.Unless the technical services allow,do not add other material to concentrate and diluent.
6.The concentration of control may be achieved through the refractometer and refraction coefficient of diluent concentration percentage.

1. Dilution ratio is appropriately adjusted according to the complexity of the casting and the depth of the mould make.
2.Using the spray gun or automatic system to spray, pay attention to Spray evenly and blow dry.
3. The best using temperature of the mould 200 ℃ to 350 ℃.
4. Die-casting mould release agent stored under normal temperature, pay Attention to prevent frostbite prevent bask in, after opening pay attention To hermetic seal and store well.

1. Are you a manufacturer or a trader?
We are one of largest manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process.