Tire Release Agent

Home > Tire Release Agent

Filled Inside Tire Paint/Coating Agent

Item No.: MK-IP
SAKURAI MK-IP is a filled, water based paint/coating agent for inside tire.
Buy At Alibaba

Filled Inside Tire Paint/Coating Agent  MK-IP

Product Description
SAKURAI Release Agent MK-IP is a filled, water based paint/coating agent for inside tire. When properly applied to the inside of green tire,this material provides excellent air bleed and lubrication between the bladder mold and the green tire, result in good tire uniformity and minimal trapped air defects.

1.Provide good lubrication and reduce air trapping.

2.Ensure green tire to stay in center of bladder mold and perfectly fit in bladder inside.

3.MK-IP assists inside tire to be efficient and clear demoulding from vulcanization process in the bladder mold.

Physical Properties


Black viscous fluid


Non strong smell


1.20 g/ml

PH value




Solids,(% nv)


Temperature resistance



No need to dilute, ready-to-use

Usage Instruction
· Clean the mold with proper detergent,and use non-polluting green tire to avoid the bad  combination of coating.
· No need to dilute and ready-to-use by adding MK-IP into the tank of spray system directly. MK-IP should be applied to the inside of every uncured tire and can be automatic spray,hand held spray gun or brush.
· Please spray once MK-IP after every time demoulding and spray uniformly on the green tire and must cover the green tire fully.

Storage & Shelf life
Please stored between 5℃-55℃ and away from acids and alkaline.Seal up container after open to use and if stored in cold temperatures,allow product to warm to room temperature prior to use.
Shelf life is 12 months at least from the date of manufacture.

30 kgs/barrel(25 Liters)    240 kgs/drum(55 gallons/200 Liters)

1. Are you a manufacturer or a trader?
We are one of leader manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use up all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process.