Supply for: Zinc alloy die casting factory
Process: General Zinc alloy die casting parts,such as Zipper,Fastener,Button
Performance: None carbon deposition, good lubrication and stable release performance
Usage: Auto or Manual spray
MOQ: 200 KGs after sample trial
MK-TG is suitable for general and complicated Zinc alloy fittings die casting by hot chamber and cold chamber machine, such as lamp fittings and zipper, fastener,button.
1.No carbon deposition performance
There will be no carbon deposition or oxide scale on the mould or casting surface, do not affect the subsequent surface treatment such as electroplating ,flame plating, etc.
2.Excellent demolding performance
Spray die casting mould release to the mould surface then effective components immediately form dense membrane, the membrane in the injection process effectively prevent die-casting products and the mould
3.Good cooling effect
Using the die-casting mould release agent and setting the mould temperature in 150-200 ℃, the mould will not cracks caused by heat and cold stress, which shortens the work cycle.
4.High temperature resistant and excellent lubricating performance
Die casting mold release agent film uniformity, not accumulation, casting surface bright and no splash. Die releasing agent for high temperature mold surface has good adhesion, can in the mold temperature up to
200DEG C under the condition of operation.
5.Cleaner & safer environments
Die-casting release agent is non-toxic, no burning, no corrosion, no chemical reaction, and in the useing process there will be no harmful smoke or smell, you can have a cleaner & safer environment
6.Clean and smooth castings
No residue on the casting surface, easy for clean and maintenance.