Metal Casting Release Agent

Home > Metal Casting Release Agent

Zinc alloy die casting Mold release agent

Item No.: MK-TG
SAKURAI  MK-TG environmental-friendly zinc alloy mould release agent. It is synthetic hydrocarbon oily release agent, suitable for many kinds of zinc alloy metal accessories. Do not contain HAP, PAHS and all kinds of heavy metals.
INQUIRY
Description

Mold release agent for Zinc alloy die casting MK-TG

⊙Product Features

1.No carbon deposition performance
There will be no carbon deposition or oxide scale on the mould or casting surface, do not affect the subsequent surface treatment such as electroplating ,flame plating, etc.

2.Excellent demolding performance

Spray die casting mould release to the mould surface then effective components immediately form dense membrane, the membrane in the injection process effectively prevent die-casting products and the mould glue together.

3.Good cooling effect
Useing the die-casting mould release agent and setting the mould temperature in 150-200 ℃, the mould will not cracks caused by heat and cold stress, which shortens the work cycle.
4.High temperature resistant and excellent lubricating performance
Die casting mold release agent film uniformity, not accumulation, casting surface bright and no splash. Die releasing agent for high temperature mold surface has good adhesion, can in the mold temperature up to 200DEG C under the condition of operation.
5.Cleaner & safer environments
Die-casting release agent is non-toxic, no burning, no corrosion, no chemical reaction, and in the useing process there will be no harmful smoke or smell, you can have a cleaner & safer environment
6.Clean and smooth castings
No residue on the casting surface, easy for clean and maintenance .

 

⊙Data sheet

Smell Low odor Density (H2O) 0.85 g/ml
Appearance Transparent red brown liquid The use of temperature 150℃-200℃
Flash point (COC) Not applicable Refraction coefficient@20℃ 1.2
Freezing point -10℃ Ph (5% dilution) 7

⊙Usage notice
1.Dilution ratio according to the complexity of the casting and mould deep make appropriate adjustments.
2.The spray gun or automatic system, pay attention to spray evenly and blow dry.
3.Mould the best temperature 150 ℃ to 200 ℃.
4.Die-casting mould release agent under normal temperature storage, pay attention to prevent frostbite prevent bask in, after opening attention hermetic seal good keeping.

1. Are you a manufacturer or a trader?
We are one of largest manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use up all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process. You should adjust a suitable dilution ratio according to the specific practical testing.

TOP