Rotational Moulding Release Agent

Plactics Release Agent

Home > Plactics Release Agent

Rotational Moulding Release Agent

Item No.: MK-007
MK-007 is a fast cure and semipermanent、generality、and solvent type rotational moulding release agent.Has high temperature thermal stability and a better abrasive resistance,and can serve demould repeatedly, low transfer to the product at the same time.
INQUIRY
Description


Rotational Moulding Release Agnet MK-007

Summary

MK-007 is a fast cure and semipermanent,generality,and solvent type rotational moulding release agent.Has high temperature thermal stability and a better abrasive resistance,and can serve demould repeatedly, low transfer to the product at the same time.Only according to the correct way to use it. The MK-007 would not to fouling formation, and the product would not to greasy,not  influence  the subsequent  process of the produt.This product is organic solvents,stirpping strength of polymer,can resistance 280°C high temperature.

Characteristic:

1.High cost-effective、high thermal stability.

2.Low transfer,the surface of the product has not sediment incrustation.

3.Multiple demoulding,has environmental protection property.

Method of application

Use for the clean/hole sealing surface of the mould

1.Use clean cotton cloth paint or the spray gun to spraying,build a film on the whole mould surface.

2.No need to use the polished finish,solidify time is 10 minutes.

3.If has the dripping phenomenon(usual in using cold mold or large area),just use the clean cotton cloth to srub.

4.Paint 3-5 times.

5.Need to 30 minutes to solidify the last layer during the normal

temperature.Can improve the solidify speed under 180°C.

Application notice:

Attention to workplace ventilation, no smoking, operators must training mount guard, shall not take the product to the staff ot the flame spraying.

If can increase the solidify time to more than 1 hour or warming the mould to 120°C keep on 30 minutes, can improve the mould film greatly.

FAQ:
1. Are you a manufacturer or a trader?
We are one of largest manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process. Besides,you should adjust the accurate dilution ratio during practice according to specific process.

 

TOP