Metal Casting Release Agent

Home > Metal Casting Release Agent

Mould release agent for Zinc alloy die casting

Item No.: MK-TH
SAKURAI  MK-TH environmental-friendly zinc alloy mould release agent. It is water based release agent, suitable for many kinds of zinc alloy metal accessories. Do not contain HAP, PAHS and all kinds of heavy metals.
INQUIRY
Description


SAKURAI Release Agent for Zinc Alloy

⊙Product features

1.No carbon deposition performance

There will be no carbon deposition or oxide scale on the mould or casting surface, do not affect the subsequent surface treatment such as electroplating ,flame plating, etc.

2.Excellent demolding performance
Spray die casting mould release to the mould surface then effective components immediately form dense membrane, the membrane in the injection process effectively prevent die-casting products and the mould glue together.

3.Good cooling effect
Useing the die-casting mould release agent and setting the mould temperature in 180-350 ℃, the mould will not cracks caused by heat and cold stress, which shortens the work cycle.
4.High temperature resistant and excellent lubricating performance
Die casting mold release agent film uniformity, not accumulation, casting surface bright and no splash. Die releasing agent for high temperature mold surface has good adhesion, can in the mold temperature up to 200DEG C under the condition of operation.
5.Cleaner & safer environments
Die-casting release agent is non-toxic, no burning, no corrosion, no chemical reaction, and in the useing process there will be no harmful smoke or smell, you can have a cleaner & safer environment
6.Clean and smooth castings
No residue on the casting surface, easy for clean and maintenance .

⊙Data sheet

Smell

Low odor

Density (H2O)

0.98 g/ml

Appearance

Milky white liquid

Best mould working Temperature

180℃-350℃

Flash point (COC)

Not applicable

Refraction coefficient@20℃

1.2

Freezing point

-10℃

Ph (5% dilution)

7


⊙Instruction
1. Please according to the technology personnel deployment test concentration, finally to determine the best dilution ratio!
2. The typical operation is mixed with purified water.
3. If more than the typical usage beyond please contact us for technical support.
4. Mix with water after use (will concentrate the water diluted).
5. Please use deionized water to dilute, helps to prolong the life of working liquid, reduce the use amount of concentrate, fully reflects the performance of the process fluid.   
6. Unless the technical services allow outside, can not add other material to concentrate and diluent.
7. The concentration of control may be achieved through the refractometer and refraction coefficient of diluent concentration percentage.

⊙Usage notice
1, Die-casting mould release agents must diluted with purified water, gently shake or stir well can use; Dilution ratio according to the complexity of the casting and make appropriate adjustments.
2, The spray gun or automatic system, pay attention to spray evenly and blow dry.
3, The best mould working temperature is 180 ℃ to 350 ℃.
4, Die-casting mould release agent under normal temperature storage, pay attention to prevent frostbite prevent bask in, after opening attention hermetic seal good keeping.

1. Are you a manufacturer or a trader?
We are one of largest manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process. You should adjust a suitable dilution ratio according to the specific practical testing.

 

 

TOP