Polyurethane Release Agent

Home > Polyurethane Release Agent

Polyurethane PU Soft Foam Mould Release Agent

Item No.: MK-SF301
Sakurai MK-SF301 is a solvent based release agent. It has proven to be effective when used to release polyurethane foams elastomers, low rebound polyurethane release, high rebound polyurethane.
Buy At Alibaba

Mould Release Agent for Polyurethane(PU) Soft Foam  MK-SF301

* Excellent release.
* Non-silicone.
* Contains no chlorinated or CFC solvents.
* Low wax build-up.

Appearance Hazy liquid
Solids 8-10%
Temperature 45-70 °C

Spray & brush
Solvent gasoline, methane, petroleum ethers,etc
Viscosity Medium

1. Clean mold surface prior to preparing the molding surface.
2. Heat the mold to operating temperature.
3. Apply a coat of MK-55 with a spray or brush, and allow to dry..
4. Rub MK-55 into mold surface with clean Cotton cloth.
5. Repeat two or three times to seal the mold surface.
6. Start molding and reapply a light coat of MK-55 after each molding cycle.

Stored at the temperature of 10 to 40 degrees,Valid date:18months.
Sakurai Release is packaged in 20&160 kg.

1.Use Adequate protection when handling any release solvent system.
2.Skin contact may cause dryness.
3.Wear safety glasses or their equivalent to prevent eye injury.
4.Avoid inhalation of excessive amount of solvent vapor.
5.At temperatures above 500°F, fumes are evolved which, if inhaled, can cause flu like systems. Use with adequate ventilation.

1. Are you a manufacturer or a trader?
We are one of leader manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use up all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing processYou should adjust a suitable dilution ratio according to the specific practical testing.