Metal Casting Release Agent

Home > Metal Casting Release Agent

Mold Release Agent for Aluminum Die Casting MK-TQ

Item No.: MK-TQ
Mold Release Agent for Aluminum Die Casting MK-TQ,is applicable for complicated aluminum fittings and large tonnage force die casting machine usage.
INQUIRY Buy At Alibaba
Description


Mold Release Agent for Aluminum Die Casting MK-TQ

Product features
1. Superior stripping performance
Sakurai Release Agent has effective ingredients form dense film at once. The membrane in the injection process of high pressure resistant, scouring resistance, low friction coefficient (0.08 mm to 0.08 mm), effectively prevent die-casting products and mould of solder. A mould adhering to prevent product variant. Excellent lubrication performance to speed up the liquid aluminum liquidity at the same time, the liquid aluminum can rapidly forming mould. Avoid the product defects and strain.

2. Super surface finish
Sakurai series adopts mothballed special materials. Black can effectively solve the casting surface, cold water lines and avoid to produce too much. Can solve the products after processing, such as: polishing and electroplating and other problems.
3. The full protection mould
Sakurai release agent in die surface to form a layer of protective film. Effectively reduce the liquid aluminum to the mould of heat and mechanical impact. Correct selection of high quality mould release agent can effectively protection, prolong the life time of the mould, reduce the repairing mould.

4. No carbon deposition
Sakurai release agent used is very easy and convenient operation. No carbon deposition, no scale and does not produce scale. Reduce the province model number and cleaning the mould, the product surface is bright and clean, bright, does not affect the subsequent spray plating, polishing and surface treatment.
5. High temperature resistant performance is superior
Sakurai release agent has good thermal stability and chemical stability. In the use of temperature range no oxidation, no burning, no corrosion mould and surface decomposition residues. Even at 300 ℃ high temperature, weight first few (thermo-gravimetric not more than 10%). To ensure that, at high temperatures, in strong demoulding film is formed on the mould. Used as high temperature burning jie. The role of lubrication and demoulding.
6. Good cooling effect
Sakurai release agent in die casting process control because the mould have been high temperature liquid metal heating temperature rising, high mould temperature to make die casting defects. Such as: sticky mould, blistering, cracking, and burned. High temperature for a long time the mould at the same time work to the mould material strength decreased, causing the deterioration of service life and die crack.
7. High safety performance
Sakurai release agent non-toxic, non-flammable, no corrosion, no chemical reaction. In the process of use do not contain harmful smoke. Mould and product surface without residue, clean and simple maintenance, a wash namely net, does not affect the subsequent processing.

Physical and chemical data

Appearance: Milky white liquid
Smell: Little smell
Using temperature: 200℃-300℃
Flash point(COC): Not apply
Freezing point: -10℃
Density(H2O): PH1.10
Refraction coefficient@20℃: 1.2
PH(5%diluent): 7


Deployment description
1.Please according to the technology personnel Deployment test concentration, finally to determine the best dilution ratio.
2.If more than the typical usage beyond please contact us for technical support.
3.Mix with water before use (mix concentrate with water diluted).
4.Please use deionized water to dilute, helps to prolong the life of working liquid, reduce the use amount of concentrate, fully reflects the performance of the process fluid.   
5.Unless the technical service allows,may add other material to concentrate and diluent.
6.The concentration of control may be achieved through the refractometer and refraction coefficient of diluent concentration percentage.

Notice
1. Dilution ratio according to the complexity of the casting and mould deep make appropriate adjustments.
2. the spray gun or automatic system, pay attention to spray evenly and blow dry.
3. mould the best temperature 200 ℃ to 350 ℃.
4. die-casting mould release agent under normal temperature storage, pay attention to prevent frostbite prevent bask in, after opening attention hermetic seal good keeping.

1. Are you a manufacturer or a trader?
We are one of largest manufacturer of Mold Release Agents in China.
2. Do you supply free sample?
We supply free sample within 1kg and you got to pay for courier freight cost. The trial cost we refund to you on bulk order.
3. Do you supply concentrate or ready-to-use release agent?
Based on your choice, concentrate and ready-to-use are both available for your purchasing.
4. What is your shipping method and transportation?
For sample,we mostly deliver small packages by Fedex/DHL/TNT air cargo with door-to-door service, which are safe and reliable for chemical liquid delivery. For bulk order, sea transportation is our first choice to save shipping cost. We make efforts to satisfy your specify requirements.
5.What is your suggestions for sample trial?
First, We suggest that everytime you use a small quantity of samples to test. Because the quantity of samples is limited, PLEASE do not use up all the samples for testing in one-time. so you can test samples for many times. If first time testing is failed, then we can have a second chance to adjust the testing process. You should adjust a suitable dilution ratio according to the specific practical testing.​​​​​​​

TOP